Conbextra EP120 14L Pack
Conbextra EP120
Conbextra EP120 is a 2 component epoxy grout for use in situations where heavy dynamic or mobile loads are encountered with gaps up to 120mm. Also for use in conditions where chemical spillage may be encountered.
Typical Applications
- Grouting reciprocating machinery
- Heavy crane and transporter rails
- High speed turbines
- Centrifuges
- Drop forges
Advantages
- High compressive, tensile and flexural strengths
- Resistant to repetitive dynamic loads
- Fast, convenient installation
- Withstands a wide range of chemicals
- Virtually no shrinkage and hence ensures complete surface contact and bond
- 28 day strength @ 20°C dependent on consistency (cube samples) : 80MPa
- Application method : Pump or pour
- Chemical resistance : Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water
- Flexural Strength (modulus of rupture) @ 28 days : 25MPa
- Gap size : 10mm to 120mm
- Indirect tensile strength @ 28 days : 10MPa
- Pot life @ 20°C : 3 hours
- Service temperature : 10°C to 55°C
- Tack free time : Free flowing
Enter dimensions of your application to caclculate the volume and the bag/kit quantity you will need.
Note: This calculator should be used as a guide only to determine product quantity requirements. Coverage rates can vary, depending on a number of factors, so for specific advice, please refer to the TDS, and/or call your Account Manager or our Customer Service team to discuss your application requirements.
enter the yield value as shown on the TDS
