Renderoc HB70 Plus 20kg Renderoc HB70 Plus FC303035-20KG
  • Renderoc HB70 Plus 20kg
  • Renderoc HB70 Plus FC303035-20KG

Renderoc HB70 Plus

  • Renderoc HB70 Plus 20kg CODE: FC303035-20KG

    ! This product is not available online

    Add to cart

Description:

Renderoc HB70 Plus is a high strength, extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R4; compatible with concrete strength > 45 MPa. For the reinstatement of concrete where low permeability, high compressive strength and high resistivity  characteristics are key requirements.

  • Quantity Per Pallet:
    50

Renderoc HB70 Plus

Renderoc HB70 Plus 20kg Renderoc HB70 Plus FC303035-20KG
  • Renderoc HB70 Plus 20kg
  • Renderoc HB70 Plus FC303035-20KG

  • CODE: FC303035-20KG
  • Renderoc HB70 Plus 20kg
  • ! This product is not available online

    Add to cart

Product Description:

Description:

Renderoc HB70 Plus is a high strength, extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R4; compatible with concrete strength > 45 MPa. For the reinstatement of concrete where low permeability, high compressive strength and high resistivity  characteristics are key requirements.

  • Quantity Per Pallet:
    50

Overview

Typical Applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application, up to 1m2 repair area
  • Vertical trowel build between 5-100mm and required strength is >45 MPa

Advantages

  • Compatible with concrete strength > 45 MPa
  • High strength - suitable for structural repairs
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • High build formulation - fewer applications of product
  • High resistivity - provides increased durability
  • Excellent bond to SSD concrete substrates – no separate primer required in most circumstances - refer to Substrate Priming section
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
  • Complies to EN 1504-3 Class R4
  • Complies to AS4020:2018

Test Certificates

Application Guide

Spec Clause

Typical Applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application, up to 1m2 repair area
  • Vertical trowel build between 5-100mm and required strength is >45 MPa

Advantages

  • Compatible with concrete strength > 45 MPa
  • High strength - suitable for structural repairs
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • High build formulation - fewer applications of product
  • High resistivity - provides increased durability
  • Excellent bond to SSD concrete substrates – no separate primer required in most circumstances - refer to Substrate Priming section
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
  • Complies to EN 1504-3 Class R4
  • Complies to AS4020:2018

Technical Data Sheet

Safety Data Sheet