Nitoproof 510

Nitoproof 510 is a grey, two-component, epoxy coating. When applied at 300 microns dry film thickness will provide a moisture barrier coating to restrict passage of dampness through concrete and masonry substrates.


Typical Applications

  • Interior faces of walls
  • Floors
  • Basements
  • Tunnels
  • Cellars
  • Retaining walls
  • Lift wells
  • Underground car parks

Advantages

  • Solvent free
  • Very low VOC emission
  • Anti-microbial formulation
  • Very low odour
  • Compatible with damp substrates
  • Compatible bonding of most subsequently applied coatings, bonding agents, and water based adhesives
  • Water based with no odour or volatile emissions
  • Easy clean up using water
  • Excellent adhesion to a variety of substrates including, concrete, brick, masonry, block, compressed fibre board, stone and timber
  • Cure Time (@23°C 50% RH) Unless Otherwise Stated : Touch dry 2 hours. Hard cure 24 hours, 20°C. Complete cure 7 days, 20°C.
  • Recoat Time : 2 hours
  • VOC Content : Very low <5 g/l

Overview

Typical Applications

  • Interior faces of walls
  • Floors
  • Basements
  • Tunnels
  • Cellars
  • Retaining walls
  • Lift wells
  • Underground car parks

Advantages

  • Solvent free
  • Very low VOC emission
  • Anti-microbial formulation
  • Very low odour
  • Compatible with damp substrates
  • Compatible bonding of most subsequently applied coatings, bonding agents, and water based adhesives
  • Water based with no odour or volatile emissions
  • Easy clean up using water
  • Excellent adhesion to a variety of substrates including, concrete, brick, masonry, block, compressed fibre board, stone and timber

Key Properties

  • Cure Time (@23°C 50% RH) Unless Otherwise Stated : Touch dry 2 hours. Hard cure 24 hours, 20°C. Complete cure 7 days, 20°C.
  • Recoat Time : 2 hours
  • VOC Content : Very low <5 g/l

Test Certificates

Spec Clause

Brochures

Technical Data Sheet

Nitoproof 510 TDS