Conbextra EP300 DP

Conbextra EP300 DP is a 3 component epoxy grout for use in applications where heavy dynamic or mobile loads are encountered with gaps upto 300mm. Particularly well suited to applications where long working time and/or large volume grouting is required. Applications include reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges and drop forges, pile head waterproofing. Also for use in conditions where chemical spillage may be encountered.

Typical Applications

  • Grouting reciprocating machinery
  • Heavy crane and transporter rails
  • High speed turbines
  • Centrifuges
  • Drop forges
  • Pile head waterproofing

Advantages

  • High compressive, tensile and flexural strengths
  • Resistant to repetitive dynamic loads
  • Fast, convenient installation
  • Withstands a wide range of chemicals
  • 28 day strength @ 20°C dependent on consistency (cube samples) : 90MPa
  • Application method : Pump or pour
  • Chemical resistance : Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water
  • Flexural Strength (modulus of rupture) @ 28 days : 33MPa
  • Gap size : 10mm to 300mm
  • Indirect tensile strength @ 28 days : 14MPa
  • Pot life @ 20°C : 3 hours
  • Service temperature : 10°C to 55°C
  • Tack free time : Free flowing

Overview

Typical Applications

  • Grouting reciprocating machinery
  • Heavy crane and transporter rails
  • High speed turbines
  • Centrifuges
  • Drop forges
  • Pile head waterproofing

Advantages

  • High compressive, tensile and flexural strengths
  • Resistant to repetitive dynamic loads
  • Fast, convenient installation
  • Withstands a wide range of chemicals

Key Properties

  • 28 day strength @ 20°C dependent on consistency (cube samples) : 90MPa
  • Application method : Pump or pour
  • Chemical resistance : Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh water and sea water
  • Flexural Strength (modulus of rupture) @ 28 days : 33MPa
  • Gap size : 10mm to 300mm
  • Indirect tensile strength @ 28 days : 14MPa
  • Pot life @ 20°C : 3 hours
  • Service temperature : 10°C to 55°C
  • Tack free time : Free flowing

Spec Clause

Detail Drawing

Brochures

Technical Data Sheet

Conbextra EP300 DP TDS