Nitoflor FC150 HP

Solvent free, high build epoxy floor coating. Highly resistant to chemical attack and the action of forklift/commercial type traffic. Nitoflor Anti-Slip Grains can be added to achieve defined slip resistance ratings. Non-taint during and after application. Produces a satin finish. Tintable with Nitoflor Colour Pots.
NOTE: this new formulation is NOT compatible with the previous base & hardener formulation.

Typical Applications

  • Food and chemical industries
  • Hospitals
  • Schools
  • Kitchens
  • High traffic applications

Advantages

  • Long lasting and easily maintained
  • Good resistance to many industrial chemicals
  • Highly resistant to the action of forklift vehicles and commercial type traffic
  • Slip resistance improves safety for plant and personnel
  • Provides an attractive satin finish
  • Can be used on horizontal and vertical surfaces, up to 1m from the floor level
  • Available in a wide range of colours including 11 Australian standard colours
  • Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values
  • Abrasion resistance : Medium
  • Chemical resistance : Medium - High
  • Foot traffic @ 20°C : 24 hours
  • Full cure @ 20°C : 7 days
  • Physical or chemical change : 17 g/l
  • Service temperature range : 55°C
  • Vehicle traffic @ 20°C : 72 hours

Overview

Typical Applications

  • Food and chemical industries
  • Hospitals
  • Schools
  • Kitchens
  • High traffic applications

Advantages

  • Long lasting and easily maintained
  • Good resistance to many industrial chemicals
  • Highly resistant to the action of forklift vehicles and commercial type traffic
  • Slip resistance improves safety for plant and personnel
  • Provides an attractive satin finish
  • Can be used on horizontal and vertical surfaces, up to 1m from the floor level
  • Available in a wide range of colours including 11 Australian standard colours
  • Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values

Key Properties

  • Abrasion resistance : Medium
  • Chemical resistance : Medium - High
  • Foot traffic @ 20°C : 24 hours
  • Full cure @ 20°C : 7 days
  • Physical or chemical change : 17 g/l
  • Service temperature range : 55°C
  • Vehicle traffic @ 20°C : 72 hours

Test Certificates

Spec Clause

Detail Drawing

Fact Sheet

Brochures

Bulletins

Technical Data Sheet

Nitoflor FC150 HP TDS