Renderoc HB40 Plus

Renderoc HB40 Plus is an extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R3, compatible with concrete 25 - 50 MPa. For the reinstatement of concrete where low permeability and high resistivity characteristics are key requirements.

Typical Applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application, up to 1m2 repair area
  • Trowel build depth between 10-40mm required, and a required strength is between 25-50 Mpa. Higher build & improved application compared to HB40

Advantages

  • Compatible with concrete strength in the range 25 to 50 MPa
  • High strength - suitable for structural repairs
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • High build formulation - fewer applications of product
  • High resistivity - provides increased durability
  • Excellent bond to SSD concrete substrates ? no separate primer required in most circumstances - refer to Substrate Priming section of TDS
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
  • Complies to EN 1504-3 Class R3
  • 28 day Strength : 50 Mpa
  • Application : Trowel, Wet Spray
  • Certifications/conforms to : RMS B80
  • Compatible concrete strength : 25-50MPa
  • Suitable for use with Galvashield anodes? : No
  • Trowel Build / Depth : 10mm to 100mm vertical

Overview

Typical Applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application, up to 1m2 repair area
  • Trowel build depth between 10-40mm required, and a required strength is between 25-50 Mpa. Higher build & improved application compared to HB40

Advantages

  • Compatible with concrete strength in the range 25 to 50 MPa
  • High strength - suitable for structural repairs
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • High build formulation - fewer applications of product
  • High resistivity - provides increased durability
  • Excellent bond to SSD concrete substrates ? no separate primer required in most circumstances - refer to Substrate Priming section of TDS
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Sustainable product with lower carbon foot print - formulation based on supplementary cementitious materials
  • Complies to EN 1504-3 Class R3

Key Properties

  • 28 day Strength : 50 Mpa
  • Application : Trowel, Wet Spray
  • Certifications/conforms to : RMS B80
  • Compatible concrete strength : 25-50MPa
  • Suitable for use with Galvashield anodes? : No
  • Trowel Build / Depth : 10mm to 100mm vertical

Application Guide

Spec Clause

Brochures

Technical Data Sheet

Renderoc HB40 Plus TDS

Safety Data Sheet

Renderoc HB40 Plus SDS