Renderoc HB70 Plus

Renderoc HB70 Plus is a high strength, extra high build, shrinkage compensated repair mortar conforming to EN1504-3 Class R4

Typical Applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application, up to 1m2 repair area
  • Vertical trowel build between 5-100mm and required strength is >45 MPa

Advantages

  • Compatible with concrete strength > 45 MPa
  • High strength - suitable for structural repairs
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • High build formulation - fewer applications of product
  • High resistivity - provides increased durability
  • Excellent bond to SSD concrete substrates no separate primer required in most circumstances - refer to Substrate Priming section
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Complies to EN 1504-3 Class R4
  • 28 day Strength : 60 MPa
  • Application : Trowel, Wet Spray
  • Certifications/conforms to : RMS B80
  • Compatible concrete strength : >45MPa
  • Suitable for use with Galvashield anodes? : No
  • Trowel Build / Depth : 5mm to 100mm vertical

Overview

Typical Applications

  • Vertical & overhead patch repairs
  • Localised trowel or wet spray application, up to 1m2 repair area
  • Vertical trowel build between 5-100mm and required strength is >45 MPa

Advantages

  • Compatible with concrete strength > 45 MPa
  • High strength - suitable for structural repairs
  • Abrasion resistant - suitable for aggressive environments
  • Shrinkage compensated - provides long term dimensional stability
  • Low permeability to potentially damaging water, CO2 and chloride ions
  • High build formulation - fewer applications of product
  • High resistivity - provides increased durability
  • Excellent bond to SSD concrete substrates no separate primer required in most circumstances - refer to Substrate Priming section
  • Can be applied using wet-spray process - providing faster high build repairs
  • Pre-bagged to overcome site-batched variations - only the site addition of clean water required
  • Complies to EN 1504-3 Class R4

Key Properties

  • 28 day Strength : 60 MPa
  • Application : Trowel, Wet Spray
  • Certifications/conforms to : RMS B80
  • Compatible concrete strength : >45MPa
  • Suitable for use with Galvashield anodes? : No
  • Trowel Build / Depth : 5mm to 100mm vertical

Test Certificates

Application Guide

Spec Clause

Brochures

Technical Data Sheet

Renderoc HB70 Plus TDS

Safety Data Sheet

Renderoc HB70 Plus SDS