Nitoflor PU200

Nitoflor PU200 has been designed to be used as a sealer coating for Nitoflor PU600 polyurethane cement floor topping, without aggregates or with a broadcast textured surface. It can also be used as a stand alone coating for concrete.

Colour floor finishes are achieved by using Nitoflor PU200 in conjunction with a colour from our Nitoflor PU Colour range, which must be used as part of the system.


Typical Applications

  • Wet processing zones in chemical processing plants and food preparation and manufacturing areas

Advantages

  • Excellent chemical resistance
  • Hard wearing - abrasion resistant
  • Low odour and non-tainting during application
  • Low VOC emission - Complies with the Green Building Council of Australia
  • Fast turnaround
  • Anti-microbial properties
  • Very good slip resistance properties with aggregates broadcast
  • Abrasion resistance : High
  • Chemical resistance : Medium - High
  • Foot traffic @ 20°C : 24 hours
  • Full cure @ 20°C : 7 days
  • Physical or chemical change : 25 g/l
  • Service temperature range : 0-60°C
  • Vehicle traffic @ 20°C : 48 hours

Overview

Typical Applications

  • Wet processing zones in chemical processing plants and food preparation and manufacturing areas

Advantages

  • Excellent chemical resistance
  • Hard wearing - abrasion resistant
  • Low odour and non-tainting during application
  • Low VOC emission - Complies with the Green Building Council of Australia
  • Fast turnaround
  • Anti-microbial properties
  • Very good slip resistance properties with aggregates broadcast

Key Properties

  • Abrasion resistance : High
  • Chemical resistance : Medium - High
  • Foot traffic @ 20°C : 24 hours
  • Full cure @ 20°C : 7 days
  • Physical or chemical change : 25 g/l
  • Service temperature range : 0-60°C
  • Vehicle traffic @ 20°C : 48 hours

Test Certificates

Spec Clause

Fact Sheet

Brochures

Bulletins

Technical Data Sheet

Nitoflor PU200 TDS