Nitoflor PU600

Nitoflor PU600 has been designed to produce flooring for applications that require high resistance to mechanical stress and chemical attack, that are subject to extreme temperatures and need to be applied within a limited timeframe.
Nitoflor PU600 must be top-coated with Nitoflor PU200.
Colour floor finishes can be achieved by using Nitoflor PU600 and PU200 in conjunction with a colour from our Nitoflor PU Colour Pigment range.

Typical Applications

  • Wet processing zones in chemical processing plants and food preparation and manufacturing areas

Advantages

  • Handles extreme temperatures
  • High chemical resistance
  • Hard wearing - abrasion resistant
  • Low odour and non-tainting during application
  • Fast turnaround times
  • Anti-microbial properties
  • Very good slip resistance properties with aggregates broadcast
  • Abrasion resistance : High
  • Chemical resistance : High
  • Foot traffic @ 20°C : 24 hours
  • Full cure @ 20°C : 7 days
  • Service temperature range : -25°C to 100°C
  • VOC content : 15 g/l
  • Vehicle traffic @ 20°C : 48 hours

Overview

Typical Applications

  • Wet processing zones in chemical processing plants and food preparation and manufacturing areas

Advantages

  • Handles extreme temperatures
  • High chemical resistance
  • Hard wearing - abrasion resistant
  • Low odour and non-tainting during application
  • Fast turnaround times
  • Anti-microbial properties
  • Very good slip resistance properties with aggregates broadcast

Key Properties

  • Abrasion resistance : High
  • Chemical resistance : High
  • Foot traffic @ 20°C : 24 hours
  • Full cure @ 20°C : 7 days
  • Service temperature range : -25°C to 100°C
  • VOC content : 15 g/l
  • Vehicle traffic @ 20°C : 48 hours

Test Certificates

Spec Clause

Detail Drawing

Fact Sheet

Brochures

Bulletins

Technical Data Sheet

Nitoflor PU600 TDS