Bitumen impregnated fibreboard
Cellflex
Cellflex is a compressible, non-extruding, bitumen impregnated, fibreboard expansion joint filler supplied in sheet form strips.
Cementitious
Cemtop GP Advanced
Self smoothing, cementitious floor topping used as an underlay for carpet and tiles, or can be over-coated, not a trafficable surface. Low VOC and fast cure. Apply at 2-50mm thickness. Can also be app...
Cementitious
Cemtop HD30
Internal and external, trafficable, cementitious floor topping. Produces a durable surface with excellent wear and improved chemical resistance. Prime with diluted Nitoprime 330, apply at 2-4mm thickn...
Cementitious
Cemtop Screed
Cemtop Screed is used to provide a strong and durable cementitious screed that can be applied to a wide variety of substrates. As a single component product it eliminates site batching and requires on...
Cementitious
Cemtop XD
Thin layer, self smoothing cementitious floor topping. Produces a smooth durable surface for internal areas subjected to foot and forklift traffic. Applied at 6-12mm thickness. It can be used either a...
Cementitious
Conbextra BB92
Ultra-high performance grout specifically designed for structural grouted connections for wind turbine foundations and oil and gas installations.
Cementitious
Conbextra C - AU
Conbextra C is a dual shrinkage compensated, high flow cementitious grout for gap thicknesses from 10 mm up to 100 mm. Conbextra C can be used as a flowable or trowel applied grout.
Cementitious
Conbextra CB
Conbextra CB is a highly flowable high strength grout which can be used for various void fill applications including, backfilling behind concrete tunnel segments and bottom up cable bolt grouting appl...
Cementitious
Conbextra CB-C
Conbextra CB-C is a Class A / Class C, dual shrinkage compensated, highly flowable and high strength grout. It can be used for various void fill applications including, backfilling behind concrete tun...
Cementitious
Conbextra Deep Pour
Conbextra Deep Pour is a high flow, dual shrinkage compensated cementitious grout for grouting applications ranging from 20 mm up to a maximum of 500 mm deep.
Epoxy
Conbextra EP10
Conbextra EP10 is a low viscosity epoxy grout for grouting small gaps (<10mm) between a base plate and substrate. Conbextra EP10 can be used to fill hairline cracks in concrete slabs.
Epoxy
Conbextra EP120
Conbextra EP120 is a 2 component epoxy grout for use in situations where heavy dynamic or mobile loads are encountered with gaps up to 120mm. Also for use in conditions where chemical spillage may be ...